Breaker Wiring

Supply list needed

  1. 7/16 socket
  2. socket wrench
  3. torch wrench
  4. 1/4-28 nilon Nuts
  5. nordlock washers
  6. robot breaker

Assambly steps

  1. First put (+ red) battery lead on breaker studs
  2. then add nord lock washer on top of that and the nilon Nut on top
  3. THEN SET TORCH WRENCH 87 INCH POUNDS
  4. Then put the 7/16 socket on the torch wrench
  5. Then add the 1/4-28 nilon nut to the stack
  6. use the torch wrench to put on everything until you feel that you can't tighten it any more. (the wrench will flex)
  7. then add the Scotch 2228 tape so metal is exposed
  8. lastly do a continuity test