Ring Terminals
Wire Gauge / Device to Stud Size
| Wire Gauge / Device | Ring Terminal Stud Size |
|---|---|
| 22 AWG (Kraken CAN) | #4 |
| 10 AWG (Kraken Power) | #6 |
| Breaker | 1/4" |
| Battery | #10 |
Kraken (10 AWG, 22 AWG) Crimping Instructions
These terminals have a seam in the center as part of their manufacturing process. This makes it important to ensure proper orientation when crimping.
- Place the terminal so the seam is resting in the semicircular side of the crimp jaw.
- Use the correct jaw:
- "1.25" for 22 AWG (furthest from handle)
- "5.5" for 10 AWG (closest to handle)
- Squeeze the handle until it releases.
- The tool will imprint a number ("1" for 22 AWG, "5" for 10 AWG) on the seam side.